Genie® GS™ scissors lift rental with rough terrain capabilities offer competitive lift speed and large, high capacity platforms to increase efficiency on the job site and finish working faster. They also enhance productivity by providing exceptional positive traction, speed, and gradeability. They’re available in electric or bi-energy 2 WD with a front active oscillating axle or diesel true 4WD machine with an optional oscillating axle and are the perfect machines when platform workspace and lift capacity are critical both for indoor and big outdoor jobs.

• Front-wheel drive and zero inside turning radius
• Multiple disc brakes provide smooth deceleration
• Drive speed interlock limits speed while elevated
• Large platform workspace with 0.91 m (36 in) roll-out platform extension
• Swing out components trays for easy access
• User-friendly Smart Link™ control and diagnostic system

Ideal for maneuvering in tight spaces, the quiet, zero emission electric Genie® GS™-2632 slab scissor lift rental is excellent for indoor and outdoor construction, maintenance and installation applications on firm, level surfaces.

• Large platform workspace with 36-in (.9 m) roll-out platform extension
• High-angle steering for excellent maneuverability
• Folding rails with half-height swing gate come standard
• Emergency stop at both platform and ground controls for added safety

Increase productivity with the traction and drive speed needed to get around jobsites and work areas with the Genie 44′ Teleboom Lift Rental. These units are designed to easily maneuver in tight spaces on construction and industrial sites.

• Maximum lift height:
  43 ft 10 in
• Maximum forward reach:
  28 ft 2 in
• Reach at maximum height:
  2 ft 1 in
• Height, stowed:
  7 ft 10 in
• Length, stowed (without forks):
  20 ft 3 in
• Width:
  8 ft 1.5 in
• Wheelbase:
  11 ft 4 in
• Ground clearance, center:
  1 ft 3 in
• Ground clearance, axle:
  1 ft 5 in
• Fork cross section:
  2 x 4 in

• Access like never before with the Bil-Jax 45′ Boom Lift Rental
• Hydraulic outriggers and automatic leveling allow operation in under 30 seconds
• High performance 4WD and light weight provide access to places larger and heavier machines cannot go
• Easily transported on a trailer with no commercial driver’s license requirement
• Dual power source (DC / Gas) allows for indoor/outdoor use
• Optimum performance
• 4,000 Watt generator
• Air / water lines to platform
• 110V GFI protected power to the platform

Bil-Jax 45′ X-Boom Lift Rental. Hydraulic outriggers with automatic leveling allows set-up in 30 seconds. It’s 4wd and lightweight design allows you to go places heavier machine simply can’t go. It’s dual power source allows for the machine to operate on either DC power or gasoline engine. It also offers 110 volt GFI power to the platform.

• Working height:
  51 ft
• Platform height:
  45 ft
• Horizontal outreach (from centerline):
  27 ft
• Horizontal outreach (from edge of footpad):
  21 ft
• Up and over height:
  20 ft 9 in
• Lift capacity:
  500 lbs
• Length – stowed:
  18 ft 2 in
• Width stowed:
  5 ft 6 in
• Height stowed:
  6 ft 7 in
• Wheelbase:
  8 ft 9 in
• Ground clearance:
  6 in
• Platform size:
  5 ft x 2 ft 6 in

50′ Towable Lift Rental. For the ultimate in reach and range, the Genie® TZ™-50 trailer mounted boom offers outstanding up, out and over capabilities in a compact, lightweight package that is easy to maneuver in congested work areas.

• Ground and platform controls use symbols to simplify operation
• Optional Drive and Set feature lets operators drive the unit from the platform when fully lowered
• 359 non-continuous turntable rotation for versatile positioning
• Illuminated outtrigger indicators
• Tilt alarm/sensor for added safety

Right-sized for completing work-at-height applications, such as general construction, maintenance, inspection and painting tasks, the new Genie® S®-60 J telescopic boom lift rental offers the essential performance that operators need to get work done at height. It offers the right solution to get work done at height, including leading unrestricted platform capacity of 660 lb (300 kg), allowing for two occupants plus tools. With a standard 6 ft (1.8 m) jib, which leads the class in length and capacity for the 60-ft (18.3 m) height class. The Genie S-60 J is compact, low-weight design (16,650 lb / 7,550 kg) keeps ground pressure low when operators are working in more sensitive ground conditions. Additionally, rental companies can fit two units on one equipment truck, reducing shipping costs and increasing rROIC, thanks to the machine’s low weight and compact size.

• Suited for use in general construction, maintenance, inspection and painting tasks
• Leading unrestricted platform capacity of 660 lb (300 kg) with 6-ft (1.8 m) jib
• Low 16,650 lb (7550 kg) operating weight in a compact chassis design
• Platform height of 60 ft 10 in (18.5 m) and horizontal reach of 40 ft 6 in (12.3 m)
• 1 ft 10 in (56.4 cm) of ground clearance to clear obstacles

Star model 1360B Heavy Duty Jib rental is designed for use on industrial lift trucks and rough terrain straightmast or extendable-reach forklifts. It has been engineered and is rated for the load capacities as shown on the load decal on the jib and in the load charts on our brochure. Star Industries has been manufacturing similar jibs for approximately 25 years and during this period, the Star HD Jibs have earned an excellent safety record. They have proven themselves repeatedly on all types of jobs all over the United States as well as in Canada, Mexico and South America.

• Reach over or under obstructions to place heavy loads.
• Set equipment on the roof or elevated decks.
• Reach through narrow openings such as windows to
  set or pick up a load.
• Load and unload trucks easier and more safely.
• Reach into motor freight vans to load or unload
  materials and equipment.
• Load, move, and handle equipment in your
  equipment yard.
• Reach over scaffold to set stone or other heavy
  masonry units.
• Hang trusses and laminated wood beams.
• Telescoping two section tubular steel boom.
• Manually telescopes from 7′ 0″ to 12′ 0″ – Pull spring-loaded pin to telescope – release pin and boom locks in desired position.
• Internal stop ensures telescoping section can not be accidently pulled all the way out.
• Jib slides on the forks and is pinned behind the heel to secure it to the forklift.
• Universal fit (slip-on-the-forks) design permits use on most all forklifts.

Turn your lift into an aerial work platform with the Safety Work Platform rental.

• Spring Hinges and Spring Loaded Latches provide Self-Closing and Latching Gate Action – Increased Safety.
• New Modular Component Guardrails – stronger and more rigid – no more loose movement in the rail system. Component Design also allows for replacement of individual components in lieu of having to replace a complete guardrail panel should damage occur.

• Expanded Metal Deck
• Goes where Scissor-Lifts can’t
• 1½ ” sq. tube Guardrails
• Faster than scaffold
• 1″ dia. Fork Retaining Pins w/ pin storage
• Provides a wider platform than boom lifts
• End Fork Loops for easier handling of platform
• Reaches over obstructions
• Integral 5½” high Toe boards

• 1.5-HP 8-Gal. Portable Air Compressor Rental
• Portable 1.5HP Air Compressor
  • Ideal for the home handyman or light-duty contractor
  • Produces 4.2 CFM @ 40 PSI; 3.7 CFM @ 90 PSI
  • “Monobloc” Die Cast Aluminum Pump
  • Durable cast iron cylinder sleeve for improved heat dispersal
• Reliable Induction Motor With Overload Protection
  • Runs on 115V single phase power; 13.5 full-load amperage
  • Conveniently plugs into standard outlets
• Easy Access Control Head
  • Monitor pressure gauges at a glance; single hose quick-connector
• 8 Gallon Horizontal Tank
  • Convenient handle & wheels make it easy to transport & store
  • 135 PSI maximum pressure

• 5.5-HP 8-Gal. Gas Wheelbarrow Air Compressor Rental
• 5.5-HP GX160 Series Engine
  • Easy to start, quiet & dependable
  • Contractor grade engine outlasts CS series models
  • Direct Drive Unit
  • Splash lubricated pump with cast iron sleeve for longer life
• Idle-Down Throttle Control
  • Saves fuel, keeps noise levels down
• Belt Drive
  • Better suited to meet contractor’s work loads
  • Ideal for farms & professional use
• Pneumatic Wheel & Easy Grip Handles
  • Makes the unit easier to move & transport

The workhorse of our fleet, the Sullair 185 Towable Air Compressor Rental is fully optimized and ready to hit the road.

• Improved Sullair 14-Series Air End
• Compact Design
• Easy service and maintenance

12-1/2-Ton Hydraulic Bottle Jack Rental

JET®JHJ Series Hydraulic Bottle Jacks have capacities from 2 to 100 tons, and are available in standard and low profile heights. The pump piston and ram are chrome plated for added corrosive resistance increasing durability. Each JHJ model functions in upright, angled or horizontal positions for increased versatility. JET JHJ Series Hydraulic Bottle Jacks comply with ANSI/ASME B30.1 and PALD-1 standards.

• Precision machined and polished cylinders provide non-abrasive, leak-free, durable performance
• Heavy-duty bases are electrically welded providing a stable platform
• Hydraulic system is protected from damage by internal by-pass mechanism
• Chrome-plated piston and ram are corrosion resistant for use in any industrial environment
• Industrial-duty construction permits use in extreme climates
• Lifting, pushing, spreading, bending, pressing or straightening capabilities
• Upright, horizontal or angled operating positions increase versatility
• Pump handle included
• Complies with ANSI/ASME B30.1 and PALD-1 Standards
• Operating temperature range from -4°F to 158°F

22-1/2-Ton Hydraulic Bottle Jack Rental

JET®JHJ Series Hydraulic Bottle Jacks have capacities from 2 to 100 tons, and are available in standard and low profile heights. The pump piston and ram are chrome plated for added corrosive resistance increasing durability. Each JHJ model functions in upright, angled or horizontal positions for increased versatility. JET JHJ Series Hydraulic Bottle Jacks comply with ANSI/ASME B30.1 and PALD-1 standards.

• Precision machined and polished cylinders provide non-abrasive, leak-free, durable performance
• Heavy-duty bases are electrically welded providing a stable platform
• Hydraulic system is protected from damage by internal by-pass mechanism
• Chrome-plated piston and ram are corrosion resistant for use in any industrial environment
• Industrial-duty construction permits use in extreme climates
• Lifting, pushing, spreading, bending, pressing or straightening capabilities
• Upright, horizontal or angled operating positions increase versatility
• Pump handle included
• Complies with ANSI/ASME B30.1 and PALD-1 Standards
• Operating temperature range from -4°F to 158°F

The MK Diamond Floor Scraper is a compact stripper that is both durable and easy to use. Both lightweight and portable, it is easily handed by a single person and the detachable handle allows for transport in smaller vehicles. Adjustable rear wheels make finding the ideal blade angle quick and simple. The MK-VTS/50 is suitable for small to medium sized residential and light commercial jobs. The MK-VTS/5O removes VCT tile, carpet, sheet vinyl, adhesives and coatings.

The Silver-Line SL-7 is the leader in floor edgers for one reason…it works! Designed and engineered to stand up to the toughest customer, the SL-7 floor edger rental delivers excellent results. It’s built to give tip performance on the toughest jobs. The Powerful motor delivers 3600 RPM for the fast, smooth cutting you want.

• Construction – Accurately machined interchangeable parts of highly polished aluminum alloys.
• Motor – 1.5 HP Universal Motor, 115 volt, AC.
• Disc Pad – 7″ Diameter, rubber backed with steel, precision balanced, 3600 RPM
• Disc Guard – Free wheeling, non-marking
• Vacuum – Oversized rerouted chamber for extra-clean pickup.
• Ball Bearings – On all revolving parts, lubricated and sealed.
• Net Weight – 30 lbs.

The Compass Edger Rental provides aggressive sanding performance in a uniquely versatile package. The rotating handle, balancing wheel and bottom slip plate deliver unmatched control while sanding stair risers and treads. For floor edging, the low-profile nose, light weight, and premium work light offer high efficiency with reduced operator fatigue.

Features:

• Rotating handle and balancing wheel make sanding stair treads and risers a breeze 
• Integrated light strip provides excellent work visibility
• Glass-reinforced nylon construction provides strength in a light-weight package
• Removable caster assembly gives stability when edging but removes for maneuverability on stairs
• Rear skid plate provides continuous stability without marking the surface
• Low profile nose allows reach under toe kicks

The DIYer can achieve professional results on their own at a fraction of the cost with the drum floor sander rental. The SL-8 floor sander is the only machine on the market that will allow the DIY customer to achieve the results they want and expect.

• Motor – 1 HP constant speed, 115 volt, AC only, 60 Cycle, single phase. Runs on 14 amps.
• Drum – Standard 8″ width, soft rubber cover with aluminum drum core, spring loaded cam paper locking system, takes 8 x 20 3/16″ paper
• Drum Speed – 1800 RPM, constant speed
• Net Weight – 115 lbs.

The SL-1218R floor sander rental allows the DIYer to accomplish the work of a rotary polisher without knowing how to run one!

• Screening floors after sanding with the SL-8 & SL-7
• Screen & recoating polyurethane floors
• Waxed floors scrubbing & polishing
• Wood deck sanding & refinishing
• Parquet floor sanding & refinishing
• New & pre-finished floor sanding & refinishing
• Tile Maintenance

17″ Heavy Duty Floor Polisher Rental. See the benefits of the 972M Super Heavy-Duty Floor Machine:

• Powered by a precision-balanced, 1.5 HP, 66-frame, D/C rectified motor. Eliminates brown-outs, low voltage and startup torque problems for fast, easy burnishing.
• The all-metal, 17″ balanced chassis provides more precise pad pressure and beautiful results. The polished metal chassis is easy to clean and looks newer longer.
• Scrub with a brush 2″ smaller than the apron size, or a pad and pad driver 1″ smaller than the apron size. Easy brush mounting with a “B”/ “92” style brush drive plug.
• 6″ non-marking, fixed operating wheels for easy transport.
• Safety-enhanced interlock switch on the handle leaves both hands conveniently in control.
• Safety-enhanced, non-conductive dual triggers on the handle eliminate shock potential.
• Heavy-duty dual switch levers.
• Fully adjustable 48″ handle is comfortable for all operators.
• Non-marking super-thick bumper protects walls and baseboards.
• Includes (1) 50-foot, 14/3-gauge safety power cord. Motor plugs into this cable at the base of the handle. Maintenance is safe and easy.

• Air Flooring Stapler Rental
• High-speed, mallet actuated pneumatic operation increases productivity over manual methods
• Extra-wide composite base plate for added stability (1/2″ and 3/4″ base plates included)
• Long reach handle for improved comfort and control (short handle optional)
• BTFAFOOTG2 Rolling Base Flooring Attachment Compatible (Sold Separately)
• Kit includes: Stapler, Graphite Mallet

• Collation Type:
  Glue
• Depth Adjustment:
  Yes
• Dry Fire Lockout:
  False
• Fastener Length:
  1.5-2 in
• Jam Clearance:
  Tool Free
• Magazine Capacity:
  92
• Magazine Loading:
  Top Load
• No Mar Pad:
  True
• Operating Pressure:
  70-90 psi
• Power Source:
  Pneumatic
• Staple Crown:
  .5 in
• Tool Height:
  14.88 in
• Tool Length:
  17.25 in
• Tool Weight:
  11.2 lbs
• Tool Width:
  3.13 in

The Power Tacker Carpet Stapler Rental has a long, slender nose that more easily parts yarns to penetrate down to the carpet’s backing. The short overall height, narrow profile, and rounded cap allow it to get into tight areas. The powerful 11 AMP solenoid drives staples even into hardwoods. Precision jam-resistant magazine is rigidly mounted on a boxed frame and opens with a simple release button. Once open, the staple channel is easily accessible for removal of broken staples. Takes DuoFast® No. 5418 or No. 5415 staples, Shur-Fast (No. 619), or generics. Comes with case and staple saver box. DuoFast® is a registered trademark of the DuoFast® corporation. Net weight: 7 lbs.

Carpet Spotter & Upholstery Cleaner Rental

Amazing 106″ water lift in a 3 gallon package! No set up time – simply unload and begin carpet or upholstery cleaning immediately. Compact size and maneuverability make the Bravo™ ideal for spotting and quick cleaning of small carpeted areas, upholstery and auto interiors. Operators will appreciate the specially designed molded-in holders that carry spray bottles, leaving the hands free.

• Unique molded-in holders carry spray bottles for greater ease
• Large six-inch wheels and transport handle plus cord wrap assembly make it a snap to wheel about
• Quickly opens up for easy servicing and repair
• Large porthole on recovery tank allows easy access for odor-free maintenance

3-Gallon Carpet Cleaner Rental

The FiveStar is a compact, self-contained carpet extractor with powerful brush agitation to effectively clean carpets, hard floors and grouted tile. It weighs only 40 pounds so it’s light enough for anyone to handle, plus the compact body design and fold-down handle make it a breeze to transport and store. The FiveStar self-contained carpet extractor is very easy to use with built-in solution and recovery tank that can be used as a portable bucket.

• Solution Tank 3 gallon
• Lift-Off Recovery Tank 3 gallon
• Solution Pressure 85 psi
• Vacuum Motor 112 CFM, 2 HP
• Waterlift 107″
• Brush Motor 1/6 HP
• Brush Speed 2,500 RPM
• Brush Style Chevron design, 4 rows
• Brush Bearings Sealed, stainless steel ball bearings
• Cleaning Width 12″
• Tank Construction Polyethylene
• Wheels 7″, non-marking
• Power Cord 25 ft.
• Dimensions 24″H x 23″L x 12″W
• Weight 40 lbs.

The Polaris self-contained carpet extractor rental combines remarkable ease of operation with unbeatable performance and portability to deliver consistent carpet cleaning results at money saving speeds! Patented 4-wheel design combined with lightweight construction allow easy transportation and unparalleled balance and maneuverability if this versatile self-contained carpet extractor.

True portability and professional performance. At only 21 lbs. (9.5 kg) and stackable up to five high, the Velo Carpet Blower Rental delivers rugged reliability, easy maintenance, and high performance. Four operating positions for maximum flexibility. Looking for variable amp draw and speed control plus a kickstand? Choose the Velo Pro!

• Versatile 4-Position Contractor-Grade Drying Power for floods and leaks, to dry carpets, floors, walls, circulate air in garages and shops, even dry in crawl spaces and behind appliances
• Energy Saver draws just 1.9 amps, so you can connect up to 6 units per 15-amp circuit on it’s GFCI outlet
• Durable and safer built tough for high use, ETL certified to UL standards, plus hospital-grade cord and lit plug provide added safety, 1 speed
• Lifetime limited on the polyethylene housing, 1 year parts and labor from date of purchase
• Goes anywhere slim size is easy to care, stack, store and can fit more places for drying versatility

Jumping Jack Compactor Rental. Honda engine; operating weight: 143 lb / 65 kg; width of ramming shoe: 11 in / 280 mm

• Operating weight lb 143
• Ramming shoe size (WxL) in 11 x 13.4 
• L x W x H in 26.5 x 13.5 x 37 
• Percussion rate max. blows/min 656
• Stroke at the ramming shoe in 2.4
• Impact force lbf 3,597
• Operating speed ft/min 23.3
• Surface capacity – Compaction ft²/h 1,281

Vibrating Plate Compactor Rental. Premium plate, Honda engine with cyclone air filter, 19.5 in/500 mm wide base plate

• Operating weight lb 196.2
• Centrifugal force lbf 3,375
• Base plate size (w x l) in 19.6 x 22.8
• Operating width in 19.6
• Height Lowest working in 20.7
• Operating height in 38
• Frequency Hz 98
• Advance travel ft/min 95
• Surface capacity ft²/h 9,365

Our portable wheel barrow style plaster/mortar gas-powered concrete mixer rental offers superior mixing performance in a compact package.

• Mixes 4.5-cubic feet (113 liters) of material
• 4.8-hp Honda GX160 gasoline engine
• Designed for small jobs – easily fits thru 32 inch door or into freight elevators

The Kushlan Products 600 Direct Drive Concrete Mixer rental is filled with features that make this rugged mixer affordable yet ideal for the do-it-yourselfer and professional. This wheelbarrow mixer is supported by a heavy gauge steel frame and polyurethane flat free tires. The 3/4 HP electric motor provides 28 rotations per minute. The 5/16″ gauge polyethylene drums are resistant to dents, cracks, and rust yet easy to clean. Telescoping steel handles allow for easy breakdown for transport or storage. Flat Free Tires. The 6 cu. ft. capacity drum holds up to 4 – 80 lbs. bags of premixed concrete. CE, UL, and CSA Approved.

• Heavy gauge steel handles
• Polyurethane flat free tires
• 120 volt
• CE, UL, and CSA approved

Save money and time. The walk-behind power buggy rental is the smart way to quickly place concrete and other material on the job site.

• Heavy-duty frame with low center of gravity
• Powered by a Honda GX390 engine recoil start
• Large 5.5-gallon (20.8 liters) fuel tank for extended uninterupted service
• Foam-filled tires provide additional traction and puncture resistance
• Forklift pockets for easy loading
• Increased stability and traction
• Capacity of 16-cubic feet (453 liters)
• Ideal for landscaping applications, material sub-base distribution, job site cleanup and material transport
• Travels up to 7.25 mph (11.5 kph)
• Infinitely variable, fully hydraulic drive system for smooth and steady operation
• Removable tires for easy access to narrow work areas
• Meets ASNI Braking guidelines B 56.8-1993

6′ or 12′ Concrete Power Screed Rental

P 35A Power Unit

• Weight operating 31.1 lb
• Engine / Motor Air-cooled single-cylinder four-cycle gasoline engine
• Engine / Motor manufacturer Honda GX35
• Displacement 2.2 in³
• Engine performance 1.0 (1.3) kW (hp)
• at rpm 7,000 rpm
• Tank capacity 0.7 US qt
• Fuel consumption 0.2 US gal/h
• Length machine 36.7 in
• Width machine 36.7 in

Our M18 FUEL™ 8 ft Concrete Pencil Vibrator Rental generates up to 1.8 peak HP, with no setup, and gives you the ability to consolidate 20 yds³ of concrete per charge. The MILWAUKEE® M18 FUEL™ 8 ft Concrete Pencil Vibrator generates 1.8 Peak HP, which is three times more powerful than competitive cordless pencil vibrators, all on the M18™ Cordless System. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 12,500 VPM for optimal consolidation with a variable speed trigger. REDLINK PLUS™ Intelligence ensures unmatched levels of performance and protection.

• Power Source – Cordless
• Weight – 12 lbs
• VPM – 0 – 12,500
• Head Diameter – 1″
• Square Head – Yes
• Variable Speed Trigger – Yes
• Overload Protection – Yes
• Shaft Length – 8 ft

36″ Gasoline-powered concrete trowel rental with Honda engine, 4.8 hp

• L x W x H (with handle, fixed version) in 79 x 36 x 41
• Weight (Operating) lb 183
• Troweling diameter in 36
• Pitch range ° 0 – 30
• Rotor speed (min. / max.) rpm 60/125
• Quantity of blades 4
• Engine / Motor Air-cooled single-cylinder four-cycle gasoline engine
• Engine / Motor manufacturer Honda
• Engine / Motor type GX 160 
• Displacement in³ 9.9
• Operating performance (SAE J1349) hp 4.8
• at rpm rpm 3,600
• Fuel consumption US gal/h 0.48
• Tank capacity US qt 3.8

The PowerMate M-1 is a heavy duty stair climber with a capacity to move loads up to 1,500 lbs. The M-1 is made from heavy duty steel construction and is ideal for moving heavy loads like safes, boilers, geothermal heat pumps, elevator equipment or any heavy, awkward load.

46-HP Kubota Tractor Rental.

Kubota’s LA1065 front loader was specifically engineered for the MX Series, thus optimizing the loader’s full capabilities. With a high lift capacity, lift height, and breakout force, the LA1065 provides the power needed for those heavy-duty jobs. The LA1065 loader features simultaneous lift and dump of the loader and bucket. The standard 2-lever quick coupler allows for easy attachment and detachment of front attachments like grapple buckets or bale spears.

E35 Bobcat Mini Excavator Rental with 13″ or 24″ bucket

Part of the R-Series, the Bobcat® E35 compact (mini) excavator is a popular choice in the 3-ton size class. Zero Tail Swing (ZTS) provides unrestricted rotation, greater flexibility and reduced potential for damage to the machine and surrounding property. It’s available with an angle blade option, long arm option or clamp-ready extendable arm option. Upgrade to an optional 33 hp engine for even more productivity.

• Horsepower 24.8 hp
• Optional Horsepower n/a
• Operating Weight 7,699 lb
• Bucket Digging Force 6,968 lbf
• Maximum Reach at Ground Level 17.2 ft
• Width 69 in
• Tail Swing Type Zero

The Bobcat® T595 compact track skid steer loader rental has the highest horsepower and Rated Operating Capacity (ROC) in the popular 500 frame size. This vertical path loader provides recognizable power in digging and pushing applications.

• Rated Operating Capacity (ISO):
  2,200 lb
• Operating Capacity (50% of Tip): 
  3142 lb
• Tipping Load:
  6285 lb
• Operating Weight:
  8055 lb
• Travel Speed:
  7.1 mph
• Travel Speed (2-speed option):
  10.4 mph
• Ground Pressure (Rubber):
  5.1 psi

Description

The Bobcat® S590 vertical path skid steer loader rental provides more reach at full lift height than a radius lift path loader without sacrificing performance. It features a Tier 4 diesel engine.

• Horsepower:
  66 hp
• Rated Operating Capacity (ISO):
  2,100 lb
• Operating Weight:
  6593 lb
• Auxiliary Std Flow:
  17.1 gal/min
• Auxiliary High Flow:
  26.7 gal/min
• Joystick Control

No matter how extreme your working conditions, the vertical-lift-path Bobcat® T66 compact track loader rental pushes through to do more in all kinds of applications and keeps working where other equipment can’t. Also referred to as a skid-steer with tracks, the T66 includes a redesigned Bobcat inline engine and direct-drive system, lift arms with cast-steel construction and improved cooling performance. This 74-hp loader offers a Rated Operating Capacity of 2450 lbs, and delivers powerful hydraulics and breakout forces, fast cycle times and increased lifting capabilities. Its roomier cab design offers a sealed and pressurized environment complete with available heated air-ride seat, clear-side enclosure, automatic heat and air conditioning, and an innovative display with machine information and performance data. Combine that with a superior 5-Link torsion suspension undercarriage for an unmatched operator experience to elevate productivity during long working hours.

No need for wheelbarrows, shovels or other hand tools when you roll onto jobsites with the Bobcat® MT100 mini track loader rental. It goes through gates, doorways and other narrow spaces with ease. The machine also delivers a big boost in power with a 1,000-lb. rated operating capacity, powerful breakout force and impressive lift height. The optimized roller spacing on the MT100’s track system improves ride quality for enhanced operator comfort and confidence when working long days. Easy, tool-free access to maintenance areas and advanced safety features, including neutral start interlocks, are standard on the MT100 mini track loader, while sealed rollers eliminate the need for daily roller maintenance and decrease downtime.

Powered by a dependable, durable Tier 4 diesel engine, this mini track loader uses an efficient hydraulic system to deliver fast cycle times and increased strength when working with big loads. This loader also features high-flotation tracks that allow it to move across wet and muddy ground conditions with less worry about repair time and costs associated with surface damage.

The MT100 makes tight jobsites easy to navigate thanks to its ergonomically designed ISO joystick controls. Plus, the dedicated ride-on platform gives you a wider view to the sides and the bucket cutting edge or attachment while keeping you above surface conditions as you work. Pair your MT100 with a range of compatible mini track loader attachments to tackle trenching, digging, carrying materials, demolition, site preparation, snow removal, utility installation, sweeping, stump grinding and more.

66″ Tooth Bucket Skid Steer Attachment Rental. Heavy Duty Teeth

• Number of teeth:
  8
• Size:
  66″

6″W 48″D Lowe Bobcat Trencher Attachment Rental

LOWE® trenching attachments have proven to be one of the most useful tools in the attachment market. Primarily used on skid steer loaders, trenching attachments also excel on compact track loaders and a wide range of mini-loaders. Use them in construction, agriculture, rental, utility, irrigation, and other applications where an open trench is required.

• IDEAL FOR:
  Homeowners and landscape professional
• APPLICATION:
  Underground sprinklers, other trenching activities

42″ Barreto Track Trencher Rental

Low maintenance and hardworking, track trenchers are reliable in the most difficult conditions. The simple steering, large tracks, and size of this trencher make the operator’s job simple and keeps your customer satisfaction high. With accessible yet protected components, maintenance costs are minimal.

Sweep a clean path easily and efficiently with the hydraulically-driven angle broom rental attachment. Quick removal jobs can be completed without damaging pavement surfaces.

The broom bristles have a waved design, delivering more surface clearing ability. This clears a cleaner path and can sweep more snow or debris in one pass. The angle broom attachment is compact, maneuverable and easy to operate, replacing manual labor and hand brooms. Clean small and large areas with less effort and in less time.

Reverse bristle rotation for dustpan sweeping available on the 64 and 84 in. brooms efficiently sweeps leaves, snow, and debris away from corners, curbs, buildings, and obstacles at a lower speed to reduce damage to the cab. Heavy duty bristles have improved wear and better visibility for the operator.

The reversible angle brush is available for all new 400-800 series compact track loaders and skid-steers, as well as Bobcat Toolcats with the 7 Pin Attachment Control Kit.

Compact Design:
Designed for maximum efficiency, the angle broom attachment is compact and highly maneuverable.

Easy Maintenance:
Quick-change rotor design makes bristle replacement quick and easy. By simply removing two bolts, the entire rotor is released.

Angle Control:
The smaller broom has manual angle up to 30 degrees left or right. The larger brooms feature electric-over-hydraulic control to provide infinite angle adjustment up to 25 degrees of angle adjustment to the left or right.

Fingertip Controls:
Precise attachment control helps to finish the job quickly and efficiently, without having to leave the comfort of the cab – applies to larger brooms with electric-over-hydraulic angle only.

Multidirection Sweeping:
Remove debris from curbs, gutters, corners, and obstacles by reversing the direction of the bristles (only available on 64 and 84 in. brooms)

Flush Sweeping:
Get as close as you want. Improved sweeping efficiency allows for flush sweeping to a curb or wall on the right side.

High-Torque Motor:
With heavier materials and debris, the high-torque motor allows for maximum power for more efficient sweeping.

Storage Stands:
Larger brooms include storage stands to provides maximum uptime protection by eliminating bristle distortion when the broom is not in use. On 68-inch and 84-inch angle broom attachments, the stands use a lever to swing the legs up or down. In the down position the legs are closer to the bristles to make attachment to the machine easier.

Patented Spring Design:
Provides optimum down-pressure, extended bristle life and excellent cleaning ability (not available on 48-inch).

Bristles:
Proven, replaceable, wafer polypropylene bristles provide excellent life and clean ability. Bristles have excellent durability and provide perfect flicking action for superior cleaning.

Prepare the land and lay a good foundation with the 6′ soil conditioner rental attachment. The rotating drum is equipped with carbide-tipped teeth, which rip through clumps and penetrate the soil.

To level and grade a surface, lock the drum for a box blade effect. Or place the drum in the float position to prepare the soil while following the contours of the terrain. The soil conditioner is a versatile, cost-effective attachment no landscaping crew should be without.

Pulverize the soil while leveling and filling in fewer passes with the soil conditioner attachment.

• Operating Weight:
  1110 lb
• Length:
  67.9 in
• Width:
  86.2 in
• Height:
  30 in
• Number of Teeth:
  121
• Degree of Angle:
  25 degrees Left or Right
• Width (Fully Angled):
  65 in
• Flow Range Min:
  13 gal/min
• Flow Range Max:
  37 gal/min

The LOWE® BG-600 grapple attachment rental is an extremely rugged industrial strength grapple. The fully enclosed bucket with reversible wear blade is extremely useful in scraping and other cleaning operations. It is excellent for use in scrap and recycling operations, removing concrete and asphalt, and other demanding applications. The closed bucket construction keeps dirt and smaller debris from spilling out, leaving a cleaner work area.

• Weight – 863 lbs. (391 Kg)
• Width – 72 inches (1,829 mm)
• Depth – 38 inches (965 mm)
• Max height (closed) – 30 inches (762 mm)
• Max height (open) – 46 inches (1,168 mm)
• Max opening gap – 42 inches (1,067 mm)